- Anti-Vandal
- Surface Mount
- Panel Mount
- Illuminated
- Process Sealed
- Right Angle
- Pushbutton
- Tactile
- DIP
- Slide
- Rocker
- Toggle
- Key
- Circuit Breaker
- Snap-Action
- Capacitive Touch
- Indicators
TH Series Capacitive Touch Switch
The Capacitive Touch TH Series anti-vandal switch is available in 16mm, 19mm, 22mm or 25mm in size. 30 Second Hold, momentary or latching in function, the TH Series is available with a flush illuminated actuator offering two ring sizes with a brushed stainless steel finish. LED color and state options include single or dual LED with LED voltage choices of 5VDC, 12VDC or 24VDC. Wire Length is 300mm, but custom length options are offered too! Contact CIT Relay & Switch directly for more information.
Features |
Datasheet in PDF |
|
Capactive Touch Vandal Proof IP68 Sealing Degree Ring Illumination 16mm up to 25mm Panel Mount |
![]() |
![]() |
Classifications | Illuminated Panel Mount Sealed Anti-Vandal |
Body Diameter
16mm, 19mm, 22mm, 25mm
Latching Option
Momentary, Latching, 30 Second Hold
Actuator Styles
Flush Illuminated Thick Ring, Flush Illuminated Thin Ring
Switch Finish
Brushed Stainless Steel
Terminal Options
Wired - 300mm
1st Led
Red/Off, Orange/Off, Green/Off, Blue/Off, White/Off, Off/Red, Off/Orange, Off/Green, Off/Blue, Off/White
2nd Led
Red/Green, Red/Blue, Blue/Green, White/Orange, Green/Red, Blue/Red, Green/Blue, Orange/White
Led Voltage
5VDC, 12VDC, 24VDC
Electrical Ratings
Max Current 15mA, Max Voltage 24VDC
Sealing Degree
IP68, Process Sealed
Electrical Life
50,000,000 cycles
Contact Resistance
<= 20mOhm initial
Actuation Force
0gF Capactive Touch
Actuation Travel
Capactive Touch
Dielectric Strength Contact To Contact
250V rms
Insulation Resistance
> 10MOhm min
Operating Temperature
-40C to 85C
Storage Temperature
-40C to 85C
Actuator Materials
Stainless Steel
Body Material
Threaded, Stainless Steel
Led Lens Material
Polycarbonate (PC)
Terminals Materials
Wire: UL1430 22AWG
Hardware
One Hex Nut & One O Ring supplied
Dimensional Drawing
Schematic