- Anti-Vandal
- Surface Mount
- Panel Mount
- Illuminated
- Process Sealed
- Right Angle
- Pushbutton
- Tactile
- DIP
- Slide
- Rocker
- Toggle
- Key
- Circuit Breaker
- Snap-Action
- Capacitive Touch
A2K Series Automotive Relay
Along with a mounting bracket option, the A2K Series Automotive Relay offers an internal blowout magnet. Large switching capacity up to 60A with coil voltage of 12VDC, 24VDC OR 48VDC. Coil power is 1.6W with contact ratings of 1A or 1C, with or without diode and resistor. The A2 Series dimensions are 26.5 x 32.0 x 33.5mm.
Features |
Datasheet in PDF |
|
| ISO Sized Automotive Relay Internal Blowout Magnets Capable of Switching up to 110VDC Suitable for DC Motor and Lamp Control PCB Pin and Quick Connect Mounting Options |
|
 |
| Contact Rating |
1A 1C: 60A@14VDC 25A@36VDC 20A@48VDC 15A@72VDC 10A@90VDC 7A@110VDC |
|
| Dimensions | Contact Arrangement |
Contact Material | Coil Voltage | Coil Power | Contact Resistance |
| 26.5 x 32.0 x 33.5 | 1A, 1C | AgSnO2 | 12VDC, 24VDC, 48VDC | 1.6W | < 50m Ohm |
| Insulation Resistance | Electrical Life | Mechanical Life | Dielectric Strength |
| 100M Ohm @ 500VDC | 100K cycles | 500K cycles | Contact-to-Contact: 500V rms Contact-to-Coil: 750V rms |
| Operating Temperature | Mounting Methods | Agency Approvals |
| -40C to 125C | PC Pin, Quick Connect |
Dimensional Drawing
Schematic
PC Board Layout
