- Anti-Vandal
- Surface Mount
- Panel Mount
- Illuminated
- Process Sealed
- Right Angle
- Pushbutton
- Tactile
- DIP
- Slide
- Rocker
- Toggle
- Key
- Circuit Breaker
- Snap-Action
- Capacitive Touch
- Indicators
J105E Series UL Approved Relay
The J105E Series relay, capable of handling up to 10A, comes in a compact and lightweight design. It features low coil power consumption while supporting high contact loads, with contact configurations of 1A or 1C and voltage options ranging from 3VDC to 24VDC. Available coil power options include 0.20W and 0.45W. The relay's dimensions are 20.59 x 10.15 x 15.75mm, and UL agency approval is E197851.
Features |
Datasheet in PDF |
|
Switching Capacity up to 10A Small Size & Light Weight; Low Coil Power Consumption High Contact Load |
|
Contact Rating |
NO: 10A@125VAC 10A@120VAC 10A@277VAC 5A@250VAC 5A@240VAC 4.2A@277VAC 3A@30vdc TV-5@120VAC 1/4hp@120/240/277VAC Pilot Duty 24VA@24VAC 125VA@120/240/277VAC C150@120VAC NC: 10A@120VAC 10A@125VAC 5A@240VAC 5A@250VAC 4.2A@277VAC 3A@30VDC 1/4hp@ |
Dimensions | Contact Arrangement |
Contact Material | Coil Voltage | Coil Power | Contact Resistance |
20.59 x 10.15 x 15.75 | 1A, 1C | AgSnO2 | 3VDC, 5VDC, 6VDC, 9VDC, 12VDC, 18VDC, 24VDC | .20W, .45W | < 50m Ohm |
Insulation Resistance | Electrical Life | Mechanical Life | Dielectric Strength |
1000M Ohm @ 500VDC | 100K cycles | 10M cycles | Contact-to-Contact: 1000V rms Contact-to-Coil: 4000V rms |
Operating Temperature | Mounting Methods | Agency Approvals |
-55C to 125C | PC Pin | E197851 |
Dimensional Drawing
Schematic
PC Board Layout