- Anti-Vandal
- Surface Mount
- Panel Mount
- Illuminated
- Process Sealed
- Right Angle
- Pushbutton
- Tactile
- DIP
- Slide
- Rocker
- Toggle
- Key
- Circuit Breaker
- Snap-Action
- Capacitive Touch
- Indicators
J107F Series UL Approved, TUV Approved Relay
F Class insulation is standard on the J107F Series relay. Light-weight and small in size, the J107F Series is PC pin mountable with contact arrangement options of 1A, 1B, or 1C. Coil voltage ranges from 3VDC up to 48VDC with coil power options of .36W, .45W or .80W. The dimensions of the UL-approved relay are 19.0 x 15.5 x 15.3mm. UL Agency approval for this PC board relay is E197851.
Features |
Datasheet in PDF |
|
F Class Insulation Standard Light Weight and Small Size PC Board Mounting Electronic Relay UL/cUL Certified |
|
Contact Rating |
20A Contact: 20A@16VDC & 125VAC General Purpose 10A@250VAC General Purpose 1/3hp@125VAC & 277VAC Normally Open 10A @ 250VAC 15A Contact: 15A@125VAC General Purpose 6A@277VAC General Purpose Normally Open 15A @ 125VAC 4FLA 40 LRA @24VDC DC Motor 12 |
Dimensions | Contact Arrangement |
Contact Material | Coil Voltage | Coil Power | Contact Resistance |
19.0 x 15.5 x 15.3 | 1A, 1B, 1C | AgSnO2 | 3VDC, 5VDC, 9VDC, 12VDC, 24VDC, 48VDC | .36W, .45W, .80W | < 50m Ohm |
Insulation Resistance | Electrical Life | Mechanical Life | Dielectric Strength |
100M Ohm @ 500VDC | 100K cycles | 100M cycles | Contact-to-Contact: 750V rms Contact-to-Coil: 1500V rms |
Operating Temperature | Mounting Methods | Agency Approvals |
-55C to 125C | PC Pin | E197851 |
Dimensional Drawing
Schematic
PC Board Layout